Python 1.5 Reference Manual
Python uses the 7-bit ASCII character set for program text and string literals. 8-bit characters may be used in string literals and comments but their interpretation is platform dependent; the proper way to insert 8-bit characters in string literals is by using octal or hexadecimal escape sequences.
The run-time character set depends on the I/O devices connected to the program but is generally a superset of ASCII.
Future compatibility note: It may be tempting to assume that the character set for 8-bit characters is ISO Latin-1 (an ASCII superset that covers most western languages that use the Latin alphabet), but it is possible that in the future Unicode text editors will become common. These generally use the UTF-8 encoding, which is also an ASCII superset, but with very different use for the characters with ordinals 128-255. While there is no consensus on this subject yet, it is unwise to assume either Latin-1 or UTF-8, even though the current implementation appears to favor Latin-1. This applies both to the source character set and the run-time character set.
if 1900 < year < 2100 and 1 <= month <= 12 \
and 1 <= day <= 31 and 0 <= hour < 24 \
and 0 <= minute < 60 and 0 <= second < 60: # Looks like a valid date
return 1
A line ending in a backslash cannot carry a comment. A backslash does not continue a comment. A backslash does not continue a token except for string literals (i.e., tokens other than string literals cannot be split across physical lines using a backslash). A backslash is illegal elsewhere on a line outside a string literal.
month_names = ['Januari', 'Februari', 'Maart', # These are the
'April', 'Mei', 'Juni', # Dutch names
'Juli', 'Augustus', 'September', # for the months
'Oktober', 'November', 'December'] # of the year
Implicitly continued lines can carry comments. The indentation of the continuation lines is not important. Blank continuation lines are allowed. There is no NEWLINE token between implicit continuation lines. Implicit continued lines can also occur within triple-quoted strings (see below); in that case they cannot carry comments.First, tabs are replaced (from left to right) by one to eight spaces such that the total number of characters up to there is a multiple of eight (this is intended to be the same rule as used by UNIX). The total number of spaces preceding the first non-blank character then determines the line's indentation. Indentation cannot be split over multiple physical lines using backslashes; the whitespace up to the first backslash determines the indentation.
Cross-platform compatibility note: because of the nature of text editors on non-UNIX platforms, it is unwise to use a mixture of spaces and tabs for the indentation in a single source file.
A formfeed character may be present at the start of the line; formfeed characters occurring elsewhere in the leading whitespace have an undefined effect (for instance, they may reset the space count to zero).
The indentation levels of consecutive lines are used to generate INDENT and DEDENT tokens, using a stack, as follows.
Before the first line of the file is read, a single zero is pushed on the stack; this will never be popped off again. The numbers pushed on the stack will always be strictly increasing from bottom to top. At the beginning of each logical line, the line's indentation level is compared to the top of the stack. If it is equal, nothing happens. If it is larger, it is pushed on the stack, and one INDENT token is generated. If it is smaller, it must be one of the numbers occurring on the stack; all numbers on the stack that are larger are popped off, and for each number popped off a DEDENT token is generated. At the end of the file, a DEDENT token is generated for each number remaining on the stack that is larger than zero.
Here is an example of a correctly (though confusingly) indented piece of Python code:
def perm(l):
# Compute the list of all permutations of l
if len(l) <= 1:
return [l]
r = []
for i in range(len(l)):
s = l[:i] + l[i+1:]
p = perm(s)
for x in p:
r.append(l[i:i+1] + x)
return r
The following example shows various indentation errors:
def perm(l): # error: first line indented
for i in range(len(l)): # error: not indented
s = l[:i] + l[i+1:]
p = perm(l[:i] + l[i+1:]) # error: unexpected indent
for x in p:
r.append(l[i:i+1] + x)
return r # error: inconsistent dedent
(Actually, the first three errors are detected by the parser; only the last error is found by the lexical analyzer -- the indentation of return r does not match a level popped off the stack.)ab is one token, but a b is two tokens).
identifier: (letter|"_") (letter|digit|"_")* letter: lowercase | uppercase lowercase: "a"..."z" uppercase: "A"..."Z" digit: "0"..."9"Identifiers are unlimited in length. Case is significant.
and del for is raise assert elif from lambda return break else global not try class except if or while continue exec import pass def finally in print
| Form | Meaning |
|---|---|
| _* | Not imported by from module import * |
| __*__ | System-defined name |
| __* | Class-private name mangling |
(XXX need section references here.)
stringliteral: [rawprefix] (shortstring | longstring) rawprefix: "r" | "R" shortstring: "'" shortstringitem* "'" | '"' shortstringitem* '"' longstring: "'''" longstringitem* "'''" | '"""' longstringitem* '"""' shortstringitem: shortstringchar | escapeseq longstringitem: longstringchar | escapeseq shortstringchar: <any ASCII character except "\" or newline or the quote> longstringchar: <any ASCII character except "\"> escapeseq: "\" <any ASCII character>In plain English: String literals can be enclosed in single quotes (') or double quotes ("). They can also be enclosed in groups of three single or double quotes (these are generally referred to as triple-quoted strings). The backslash (\) character is used to escape characters that otherwise have a special meaning, such as newline, backslash itself, or the quote character. String literals may optionally be prefixed with a letter 'r' or 'R'; such strings are called raw strings and use different rules for backslash escape sequences.
In "long strings" (strings surrounded by sets of three quotes), unescaped newlines and quotes are allowed (and are retained), except that three unescaped quotes in a row terminate the string. (A "quote" is the character used to open the string, i.e. either ' or ".)
Unless an 'r' or 'R' prefix is present, escape sequences in strings are interpreted according to rules similar to those used by Standard C. The recognized escape sequences are:
| Escape Sequence | Meaning |
|---|---|
| \newline | Ignored |
| \\ | Backslash (\) |
| \' | Single quote (') |
| \" | Double quote (") |
| \a | ASCII Bell (BEL) |
| \b | ASCII Backspace (BS) |
| \f | ASCII Formfeed (FF) |
| \n | ASCII Linefeed (LF) |
| \r | ASCII Carriage Return (CR) |
| \t | ASCII Horizontal Tab (TAB) |
| \v | ASCII Vertical Tab (VT) |
| \ooo | ASCII character with octal value ooo |
| \xxx... | ASCII character with hex value xx... |
In strict compatibility with Standard C, up to three octal digits are accepted, but an unlimited number of hex digits is taken to be part of the hex escape (and then the lower 8 bits of the resulting hex number are used in all current implementations...).
Unlike Standard C, all unrecognized escape sequences are left in the string unchanged, i.e., the backslash is left in the string. (This behavior is useful when debugging: if an escape sequence is mistyped, the resulting output is more easily recognized as broken.)
When an 'r' or 'R' prefix is present, all backslashes are left in the string. For example, the string literal r"\n" consists of two characters: a backslash and a lowercase 'n'. String quotes can be escaped with a backslash, but the backslash remains in the string; for example, r"\"" is a valid string literal consisting of two characters: a backslash and a double quote.
"hello" 'world' is equivalent to "helloworld". This feature can be used to reduce the number of backslashes needed, to split long strings conveniently across long lines, or even to add comments to parts of strings, for example:
regex.compile("[A-Za-z_]" # letter or underscore
"[A-Za-z0-9_]*" # letter, digit or underscore
)
Note that this feature is defined at the syntactical level, but implemented at compile time. The '+' operator must be used to concatenate string expressions at run time. Also note that literal concatenation can use different quoting styles for each component.
longinteger: integer ("l"|"L")
integer: decimalinteger | octinteger | hexinteger
decimalinteger: nonzerodigit digit* | "0"
octinteger: "0" octdigit+
hexinteger: "0" ("x"|"X") hexdigit+
nonzerodigit: "1"..."9"
octdigit: "0"..."7"
hexdigit: digit|"a"..."f"|"A"..."F"
Although both lower case 'l' and upper case 'L' are allowed as suffix for long integers, it is strongly recommended to always use 'L', since the letter 'l' looks too much like the digit '1'. Plain integer decimal literals must be at most 2147483647 (i.e., the largest positive integer, using 32-bit arithmetic). Plain octal and hexadecimal literals may be as large as 4294967295, but values larger than 2147483647 are converted to a negative value by subtracting 4294967296. There is no limit for long integer literals apart from what can be stored in available memory.
Some examples of plain and long integer literals:
7 2147483647 0177 0x80000000 3L 79228162514264337593543950336L 0377L 0x100000000L
floatnumber: pointfloat | exponentfloat
pointfloat: [intpart] fraction | intpart "."
exponentfloat: (intpart | pointfloat) exponent
intpart: nonzerodigit digit* | "0"
fraction: "." digit+
exponent: ("e"|"E") ["+"|"-"] digit+
Note that the integer part of a floating point number cannot look like an octal integer. The allowed range of floating point literals is implementation-dependent. Some examples of floating point literals:
3.14 10. .001 1e100 3.14e-10
imagnumber: (floatnumber | intpart) ("j"|"J")
An imaginary literals yields a complex number with a real part of 0.0. Complex numbers are represented as a pair of floating point numbers and have the same restrictions on their range. To create a complex number with a nonzero real part, add a floating point number to it, e.g. (3+4j). Some examples of imaginary literals:
3.14j 10.j 10 j .001j 1e100j 3.14e-10jNote that numeric literals do not include a sign; a phrase like -1 is actually an expression composed of the unary operator '-' and the literal 1.
+ - * ** / % << >> & | ^ ~ < > <= >= == != <>The comparison operators <> and != are alternate spellings of the same operator; != is the preferred spelling, <> is obsolescent.
( ) [ ] { }
, : . ' = ;
The period can also occur in floating-point and imaginary literals. A sequence of three periods has a special meaning as ellipses in slices.The following printing ASCII characters have special meaning as part of other tokens or are otherwise significant to the lexical analyzer:
' " # \The following printing ASCII characters are not used in Python. Their occurrence outside string literals and comments is an unconditional error:
@ $ ?
Generated with Harlequin WebMaker