public:
TCONS TCONS(Text_t* name, Text_t* title, Text_t* material, Float_t dz, Float_t rmin1, Float_t rmax1, Float_t rmin2, Float_t rmax2, Float_t phi1, Float_t phi2) TCONS TCONS() TCONS TCONS(Text_t* name, Text_t* title, Text_t* material, Float_t rmax1, Float_t dz, Float_t phi1, Float_t phi2, Float_t rmax2 = 0) TCONS TCONS(TCONS&) virtual void ~TCONS() TClass* Class() virtual Float_t GetRmax2() virtual Float_t GetRmin2() virtual TClass* IsA() const virtual void SetPoints(Float_t* buff) virtual void ShowMembers(TMemberInspector& insp, char* parent) virtual void Streamer(TBuffer& b)Data Members
protected:
Float_t fRmin2 inside radius at the high z limit Float_t fRmax2 outside radius at the high z limit
CONS is a segment of a conical tube. It has 10 parameters: - name name of the shape - title shape's title - material (see TMaterial) - dz half-length in z - rmin1 inside radius at -DZ in z - rmax1 outside radius at -DZ in z - rmin2 inside radius at +DZ in z - rmax2 outside radius at +DZ in z - phi1 starting angle of the segment - phi2 ending angle of the segment NOTE: phi1 should be smaller than phi2. If this is not the case, the system adds 360 degrees to phi2.
*-*-*-*-*-*-*-*-*-*-*-*CONS shape default constructor*-*-*-*-*-*-*-*-*-*-*-*-* *-* ==============================
*-*-*-*-*-*-*-*-*-*-*-*-*CONS shape normal constructor*-*-*-*-*-*-*-*-*-*-*-*-* *-* =============================
*-*-*-*-*-*-*-*-*-*-*-*-*CONS shape normal constructor*-*-*-*-*-*-*-*-*-*-*-*-* *-* =============================
*-*-*-*-*-*-*-*-*-*-*-*-*CONS shape default destructor*-*-*-*-*-*-*-*-*-*-*-*-* *-* =============================
*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*Create CONS points*-*-*-*-*-*-*-*-*-*-*-*-*-*-* *-* ==================
Float_t GetRmin2() Float_t GetRmax2() TClass* Class() TClass* IsA() const void ShowMembers(TMemberInspector& insp, char* parent) void Streamer(TBuffer& b) TCONS TCONS(TCONS&)